Solar Outdoor Animal Repeller 360 – Demo Unit

Solar Outdoor Animal Repeller 360 – Demo Unit

Solar Outdoor Animal Repeller 360 provides protection against invading animals and birds from all directions.

PLEASE NOTE: This product is a second-hand/returned unit and is not in brand new condition. Some minor parts may be missing however, the unit is fully functional. Sales on All Clearance Items are Final.

Benefits:

• USB & Solar charge
• smart design with PIR sensors
• two flashing LED lights
• ultrasonic speakers in each face (15-50kHz frequency)
• optional audible alarm scarer
• three faces working independently.
• waterproof IP44 design

Features:

• The Repeller provides 360-degree protection against invading animals and birds from all directions.
• It has a smart design with PIR sensors, two flashings LED lights and ultrasonic speakers in each face, with the three faces working independently.
• The PIR sensor can activate to work automatically by flashing the LED lights, emitting an ultrasound and alarm sound.
• The Repeller works automatically with ultrasound frequency 15-50kHz, once unwanted intruders are detected.
• Three working modes can be chosen to repel different animals effectively.
• The Repeller will go into standby mode 10 seconds after the animals leave, so as to keep energy use low.
• Solar-panel fitted to the top of the unit for recharging in the sun (rechargeable batteries are included)
• USB connection for charging the unit when there is a lack of sunlight for charging the unit (USB cable included)
• Waterproof IP44 design.
• 20-metre motion detection range

Installation

• Before installation, please charge the repeller under direct sunlight for 12 hours or charge via USB for 4 hours. One of the PIR sensors will turn red when charging.
• Assemble the poles one by one using the supplied connectors.
• Turn on the unit by holding down the Power/Blue Light button for 2 seconds. It will go through a self-check mode briefly then the unit is ready to go.
• Connect the repeller to the pole and push the pole into the ground.

Instructions

1. Hold down the power button to turn on the unit.
2. The repeller will activate if the PIR motion sensor detects animal movement. If there are no animals in the detection area, the repeller will remain on standby mode.
3. No matter which direction the animal comes from, they will be detected by one of the 3 PIR sensors.
4. The Repeller will start to work automatically by flashing LED lights, emitting ultrasonic sound (15-50kHz frequency) and an alarm sound. (The alarm sound can be turned off as required)
5. By default, the blue light and alarm sound is switched on, this can be turned on/off by pressing the respective buttons.

a) How to turn off the blue light?
To turn off the blue light, press the button “Power/Blue Light” once, then the blue light will be turned off. If you want to turn the blue light on again, press the button again. In the evening the blue light can’t be turned off.

b) How to turn off the alarm sound?
To turn off the alarm sound, press the button “Sound” once, the alarm sound will be turned off in the next cycle. If you want to turn on the alarm sound again, press the “Sound” button once. Note: When the alarm sound is on, the green indicator light is on and when the alarm sound is off, there is no green indicator light.

Modes

a. Alarm/Ultrasonic/LED lights – This mode will deter all animals and birds – Green indicator light is on

b. Ultrasonic/LED Lights – This mode will deter mainly animals, however, birds will be deterred by the bright flashing LED lights – Green indicator light off

Notes

Please install the repeller in a sunny location.
If there is not enough sunshine, charge the repeller via the USB cable.
For better results keep the head of the repeller 20 cm above the ground.
Do not cover the PIR sensor, otherwise, the repeller will not work.
Keep the repeller away from your children and pets.
The repeller does not work while charging with the USB.

Another popular deterrent is our Fox Lights fox deterrent products.