Selleys Kwik Grip Clear – 50ml

Always use in a well-ventilated area. Ensure both surfaces are clean and dry before applying.

For contact bonding, apply a thin layer to porous surfaces and let it dry for about 40 minutes. Then, apply adhesive to both surfaces, spread evenly, and let it dry until tacky (about 15 minutes, but no longer than 30 minutes).

Carefully align and press surfaces together, starting from one edge and working your way across. The bond is instant upon contact, but maximum strength is reached after 24 hours.

Use a roller or a padded block to secure the bond, and clamp warped surfaces if needed.

Wet Bonding (for small porous areas):
Apply adhesive to one surface, bring both surfaces together, and clamp until dry.

Important Notes:

• Not suitable for rough, ill-fitting surfaces—consider using Liquid Nails or Araldite instead.
• Not compatible with polyethylene or polypropylene plastics—use Selleys All Plastic Fix instead.
• Do not use if the temperature is below 10°C.
• Test on a small area first, as some plastics and vinyl surfaces may react with the adhesive.

Handy Tips:

• A 500mL container covers up to 2.5m², depending on surface porosity.
• Use a brush, knife, or serrated scraper for application.
• Contact bonding is immediate—once surfaces touch, they are permanently bonded.
• Always keep the container sealed when not in use.