Selleys Knead It Steel Epoxy Repair System – 110g

Selleys Knead It Steel Epoxy Repair System – 110g

Selleys Knead It Steel Epoxy Repair System – 110g is a versatile hand-kneadable, fast-setting, non-rusting co-extruded epoxy repair method for metal products.

Features:

• There will be no sagging, running, or dripping.
• It’s simple to use and there’s no mess.
• One hour after mixing, it can be drilled, sawed, sanded, filed, tapped, machined, or painted.
• Good adhesion properties.
• It’s possible to reshape, reconstruct, and repair a wide range of surfaces and applications with it.

Suitable for these materials:

• Steel
• Wide range of ferrous metal and aluminium items
• Most plastics* (pre-test required)
• Glass

How to use:

1. Before cleaning, roughen the bond region for the best results.
2. Remove all grease, grime, and dust from the surface.
3. Remove the required amount of material.
4. On the remaining portion, replace the disc.
5. To avoid smearing your hands, wear gloves.
6. To mix, knead with your fingers until the colour is uniform. Warm to room temperature if mixing is difficult.
7. Apply with pressure to the damaged surface (within 2 minutes of mixing) and shape as needed.
8. If the material adheres to your fingers, push it in place using the plastic wrapping.
9. Remove excess and hand wipe with water or damp cloth before hardening begins for a smooth appearance.
10. Before the initial hardening, trim away any excess. Before the initial hardening, clean any residues with acetone. Once the excess has hardened, it can be sanded or trimmed away.
11. It will harden in 5-10 minutes and begin to establish a solid bond.
12. After each use, thoroughly wash hands with soap and water.

Browse through the rest of our range of Selleys Products.