Selleys ArmourFlex
Selleys ArmourFlex is a watertight sealant that can provide superior quality strength along with instant grab. It also provides better flexibility than any other adhesive or sealant in the market. It is suitable for concrete, timber, metals, cement sheeting, brick, plasterboard, ceramic tiles, fibreglass and most plastics.
Selleys ArmourFlex does not require a primer and it can be applied to wet or damp surfaces with excellent adhesion. It can be used for skylights, walls, patios, floors, fencing and windows.
How to use:
- Ensure substrates are clean and free of oil, grease or lose particles.
- Cut seal and nozzle and fit the cartridge, then place in a caulking gun.
- Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into the joint.
- For neat joints, use masking tape on both sides of the joint and remove it before skinning.
- A tool with a soapy solution before skinning occurs.
- For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth.
Limitations:
- Not suitable on polyethylene, polypropylene or Teflon.
- Not for permanent water immersion or below water-line use.
Features:
- Superior strength & instant grab
- No primer required
- Watertight seal with a 10-year guarantee
- Can be applied to wet or damp surfaces with excellent adhesion
- Non-bubbling
- Better curing and extrudability (>5°C)
- Easily paintable with 2 coats of water-based paints after product skins in 60 to 90 minutes
- Sandable
- Long-lasting flexibility
- Fast curing
- Trafficable
Available in 300g, 465g and 600g.
Colour options: Clear, Black, Grey and White.
Shop By Pest
Health Solutions
Reviews
There are no reviews yet.