We want you to be completely satisfied with your purchase. If for any reason you are not, we are happy to assist with a return or exchange of your purchase.
Simply contact our customer service team and we will guide through the process to ensure smooth and hassle-free experience.
Customer Service Department on 1800 33 88 88
Email: [email protected]
See our Return Policy.
Free Shipping:
Estimated Delivery Times:
Shipping Carriers:
Delivery Conditions:
Premium Shipping:
Standard Shipping:
$69.95
SKU: PGC-750
4 fortnightly payments of
4 fortnightly payments of
4 fortnightly payments of
Protite Epoxy Glass Coat Kit 750ml are high gloss, extremely durable and scratch resistant with a glass-like finish. Made for thin pours, equivalent to 60 coats of varnish and is a self-levelling 2-part epoxy system. Ideal for tables, bench tops, mosaics, plaques and small craft projects.
Looking for additional item? Please look into our other Fibreglass-related items.
1. Ensure adequate ventilation and a clean, dry, and lint-free workstation with a room temperature above 20°C and humidity below 60%.
2. Clean and elevate the surface to be coated. Use tape to mask off areas.
3. Calculate the surface area to determine volume requirements with a 2:1 ratio of resin to hardener.
4. Pour Part A (Resin) into a measuring bowl, then pour the correct amount of Part B (Hardener) into a separate measuring bowl.
5. Combine Part A and Part B in a mixing container, scraping the sides and stirring slowly for two minutes. Avoid vigorous mixing to prevent air bubbles. A second container can be used to ensure thorough mixing.
6. Pour evenly over the surface; the product is self-leveling. Use a spreader to help.
7. Use a propane/butane torch to remove bubbles.
| Brand | Protite |
| Kit Contents | Protite Glass Coat Resin (Part A, 500ml) Protite Glass Coat Hardener (Part B, 250ml) Instruction manual |
| Coverage | 750ml covers 0.75m² at 1mm thickness or 1.5m² at 0.5mm thickness; actual coverage depends on substrate porosity. One coat is equivalent to 60 coats of ordinary varnish (at 1mm thick). |
| Mixing Ratio | Resin to Hardener: 2:1 |
| Suitable Surfaces | Wood, rocks, paper, metal, plastics, fabric, painted surfaces, decals, oil paints, bisque, dried flowers, straw flowers, bread, models, transfers, figurines, styrofoams, and pine cones. |
| Unsuitable Surfaces | Polished, non-porous surfaces, vitreous enamel, and exterior surfaces. |
The 750ml Glass Coat kit will typically cover 0.75m² at 1mm thick or 1.5m² at 0.5mm thick. The actual coverage can vary depending on the porosity of the surface you are coating. One coat of this epoxy is equivalent to 60 coats of ordinary varnish at 1mm thickness.
To prepare the surface, ensure the workspace is well-ventilated and dust-free, with a temperature above 20°C and humidity below 60%. Clean the surface thoroughly to remove dust, grease, wax, and oil.
For porous timber, apply a penetrating pore sealer to lock in tannins and oils and allow it to dry completely. Mask off any areas you don’t want coated using low-tack masking tape. Elevate the item about 5 cm above the work area to allow the coating to drip freely.
There could be several reasons: Not enough catalyst (hardener) was used, or the resin has been spread too thin. The minimum recommended depth is 5mm.
Another reason could be that the ratio of Resin (Part A) and Hardener (Part B) was not correct. If the material is not sufficiently mixed the final product will not achieve its full cure and may remain soft or sticky.
Not the one you’re looking for? Looking into our Building Materials for more options.
| Sizes |
750ml |
|---|---|
| Brand |
Protite |
| ALL Product Type |
Epoxy ,Resins |
| Fibreglass and Resins |
Epoxy ,Resins |
Protite Epoxy Glass Coat Kit 750ml
Hey Rose,
To prepare for using the Protite Epoxy Glass Coat Kit, follow these steps:
Workstation Setup: Ensure the workspace is well-ventilated and dust-free. The area should have a temperature above 20°C and humidity below 60%.
Surface Preparation: Clean the surface thoroughly so it’s free of dust, grease, wax, and oil. For porous timber, apply a penetrating pore sealer to lock in tannins and oils. Allow it to dry completely.
Masking: Use low-tack masking tape to protect areas you don’t want coated. Elevate the item about 5 cm above the work area to allow the coating to drip freely.
Mixing: Combine the resin and hardener in a 2:1 ratio, mixing thoroughly to ensure a proper blend.
Pouring and Application: Pour the mixture onto the surface and spread evenly. The product will self-level, but you may need to use a spreader to ensure complete coverage.
Protite Epoxy Glass Coat Kit 750ml
No account yet?
Create an Account
4 fortnightly payments of
4 fortnightly payments of
4 fortnightly payments of
Shop By Pest
Mosquito Traps
Health Solutions
Reviews
There are no reviews yet