CN Timber Oil

CN Timber Oil

CN Timber Oil is suitable for hardwoods and softwoods, a powerful all-purpose preservative to guard against fungal deterioration and wood borers. Reseal cut ends of treated timber.

Features:

• Protects from fungal decay and borers.
• A non-volatile oil base carrying the copper naphthenate penetrates by soaking into checks and cracks in the timber
  surface. The copper component bonds to the cellulose structure of the timber and the oil dry on exposure to sunlight
  and air. The end result is that the product gives timber protection against biological degradation such as fungal decay.
• Reseals cut ends of treated timber.
• Ideal to use on fences, landscaping, wharves, bridges, and engineered structures.

How to use:

• New timber should be weathered before application. This is particularly important with naturally oily timbers such as
  Tallow Wood and Jarrah. Dressed timbers, when new, should be allowed to weather for a few weeks prior to application.
  Thinning the product with mineral spirits or kerosene may also improve absorption and drying speed. For old timbers and
  remedial treatments, it is essential that any decayed and weathered wood or old paint be removed prior to application.
• CN OIL can be applied by brush, roller or spray. For exterior applications, two coats are generally recommended with
  particular attention to end grain, joints and interfaces (also see Protim Solignum Timber Protective Emulsion CN). Clean
  up with mineral turpentine.
• Apply moderately as excess product will not absorb readily in most timbers. Coverage will generally be 6-8 square metres per litre.

*Reading product label instructions before use in regard to application, safety and storage is highly recommended.