Aquadhere Durabond PU Glue – 460ml

Preparation:

• Wear gloves as the adhesive bonds to the skin.
• Ensure surfaces are clean, dust-free, and grease-free. One surface should be porous for proper bonding.
• The glue requires moisture to cure. For very dry porous surfaces, wipe with a damp cloth one minute before bonding.
• For oily timber, clean with acetone on a rag and allow to dry before applying adhesive.

Application:

• Apply a thin layer to one surface only—the glue expands and foams as it cures.
• Assemble within 10 minutes and clamp firmly for approximately 4 hours.
• Wipe the nozzle after use, seal tightly, and store in a dry place—the product is sensitive to humidity.
• Maximum strength is reached in 24 hours, depending on humidity and material porosity.

Limitations:

• Do not add water to the glue or container.
• Not suitable for applications below the waterline or continuous submersion.
• Will not bond polyethylene or polypropylene plastics (test other plastics first).
• Not for structural applications.
• Requires atmospheric moisture to cure, which may affect use in very dry conditions.
• Should not be used in temperatures below 5°C.
• Excess moisture can cause increased foaming and weakened joints—ensure tight clamping or weighting.

Handy Tips:

• Coverage: 460mL covers approximately 3-4m².
• For smooth surfaces like glass, plastics, or metals, sanding or roughening the surface improves adhesion.
• Tighter clamping results in a stronger bond.
• In extremely dry conditions, wipe dry surfaces (e.g., terracotta) with a damp rag before bonding to ensure enough moisture for curing. Surfaces should not be wet.
• To clean porous surfaces before application, use Selleys Liquid Sugar Soap. For non-porous surfaces like glass or metal, clean with acetone. For stubborn residues (e.g., old paint), use a paint stripper.

Removing Glue from Skin:

• If glue contacts the skin, remove immediately with acetone or white spirits, then wash with soapy water and apply hand cream.
• Alternatively, wipe hands regularly while using the glue to prevent buildup.
• Once cured, the adhesive is extremely difficult to remove.
• If cured glue is on the skin, rub with vegetable oil or Vitamin E cream to speed up the natural shedding process, allowing the adhesive to fall off.